Hawke 501/453 Universal Brass Cable Gland Kit, B, M25

Hawke 501/453 Cable Gland Kit, M25

Hawke 501/453 Universal dual certified cable glands are Group II Hazardous Area certified. Suitable for internal and external use they provide armour clamping for all armour/braid types using one clamping arrangement.

These glands provide a diaphragm seal on the cables inner sheath which will not damage cable that has 'cold flow' characteristics. They additionally provide an outer deluge seal to prevent moisture ingress to the cable armour/braid and a cable retention, low smoke & fume, zero halogen seal onto the cable outer sheath.

Kit includes; gland, locknut, earthtag, nylon washer and serrated washer

Technical Summary

Cable Type: Single wire armour 'W', wire braid 'X', steel tape armour 'Z', elastomer and plastic insulated cables

Thread: "B" M25

Temperature Range: -60°C to +80°C

Certification: Exdb IIC Gb, Exeb IIC Gb, ExnR IIC Gc, Extb IIIC Db

Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X

Deluge Protection: DTS01

Zones: Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC

Full technical details available on the Specification Tab

Technical Data:
FeaturesThe seal is manufactured from a silicone material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures
FeaturesReversible clamping ring - the gland can be adjusted to accommodate all types of cable armour or braid
FeaturesUnique diaphragm sealing system does not damage cables exhibiting "cold flow" characteristics
FeaturesInspectable deluge seal - prevents ingress into equipment and cable gland preventing corrosion of cable armour
Armour Braid1.25mm / 1.6mm
Cable TypeSingle wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables
Fully Compressed Length69.9mm
Hex Dims Flats36mm
Hex Dims Corners39.5mm
Ingress ProtectionIP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X (IP68 requires additional installation procedures)
Deluge ProtectionDTS01
Inner Sheath Seal11.1mm (min) to 19.7mm (max)
MaterialBrass (other finishes available, please call for details)
Outer Sheath16.9mm (min) to 26mm (max)
Temperature Range-60°C to +80°C
ThreadM25 1.5mm pitch x 15mm thread length
ApprovalsExdb IIC Gb, Exeb IIC Gb, ExnR IIC Gc, Extb IIIC Db
Constrution And Test StandardsIEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15 and IEC/EN 60079-31

We offer a free 48 hour (2 working days) delivery service to most areas of the UK for orders over £100.  *

For orders under £100 there is a small order charge of £5.00 per delivery.*

If you require a faster delivery please choose the relevant FedEx delivery option at check out and if your order is placed by 2 pm we will deliver the next working day (pre 12 noon delivery options are available at the check out).

Alternatively contact us on  [email protected] and we will be able to help you.

Please note that orders are despatched on working days only, so if you place an order on a Saturday, Sunday or bank holiday it will be despatched the following working day.

If you require delivery to outside of the UK then please contact us on  [email protected] and we will be able to help you.

We want you to be happy with your purchase, however if you change your mind you can return it to us under our 30 Day Money Back Guarantee.*

*For full details or our delivery and returns policies please refer to our Customer Services section or contact us on [email protected].